22 mm replica exhaust suitable for Puch Maxi S & N, Puch X30 Sport NS / NL, as well as Supermaxi LG1 / LG2 (if Puch Maxi cylinder is mounted) moped / moped.
The exhaust is a 2-piece, bolted, with corresponding Puch number.
The M7 bolt at the end of the flame tube must be locked with an additional nut, otherwise the nut may loosen and the muffler insert may fall out.
We also recommend replacing the mounted gasket between the flame tube and the muffler. You can find a high-quality replacement product in the accessories section.
Attention: The sound of the replica exhausts can be slightly louder than the originals, which can be remedied by wrapping wool around the muffler. You will find this in the accessories section below.
Original Puch spare part number: 349.1.16.000.2
A quality product made in Portugal.
Details
| Manufacturer | Made in Portugal |
| Material | Steel |
| Surface | chrome-plated |
| Total length | 920 mm |
| Color | Chrome |
| Ø outside | 58 mm |
| Number of fixing points | 4 pcs |
| Mounting type | Welded lug, Stud bolts & nuts |
| Ø Flame tube outside | 22 mm |
| Exhaust type | Flute |
| Flame tube attachment | Flange |
Suitable for the following models
| Puch | E50 |
Accessories & related products
Stop nut M7 Inox
Material: Chrome steel (known as Nirosta®) · Thread type: M10x1.5 (standard thread) · Thread type: M4x0.7 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M7x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Drive: External hexagon · Nut type: Self-securing nut
EUR 0,80
Moped fans like you also bought:
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Height: 55 mm · Manufacturer: GPO · Total length: 135 mm · Material: Aluminum · Surface: sandblasted · Width: 125 mm · Ø cylinder: 38 mm · Candle thread: short · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Area of application: Standard
EUR 38,00
swiing nozzle set M3.5 (64 - 74) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing · Total length: 6 mm · Material: Brass · Component group Carburetor: Spraying · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Drive: Slot · Quantity: 6 pcs · Nozzle type: Main nozzle · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74
EUR 18,40
GPO 44 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Height: 55 mm · Manufacturer: GPO · Total length: 135 mm · Material: Aluminum · Surface: sandblasted · Width: 125 mm · Ø cylinder: 44 mm · Candle thread: short · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: Yes · Area of application: Tuning
EUR 49,50
Hot 
swiing 15 mm carburetor tuning camouflaged | Puch
Nominal diameter: 15 mm · Height: 95 mm · Manufacturer: swiing · Total length: 66 mm · Material: Aluminum · Component group Carburetor: Carburetor complete · Width: 50 mm · Carburetor type: SRE · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Area of application: Tuning · Clamping screw torque (max.): 4 N/m
EUR 92,30
Hot
swiing® ingenious 15 mm intake manifold camouflaged | Puch E50
Ø inside: 15 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Ø External connection: 20 mm · Total length: 46 mm · Mounting type: Screws · Hole spacing inlet: 38 mm · Total height: 53 mm · Height flange center hole: 43 mm · Number of fixing points: 2 pcs · Camouflaged: Yes · Area of application: Tuning
EUR 40,30
Collection only possible with online purchase and appointment.
