Capacitor with two cables suitable for Piaggio Bravo and SI mopeds / mopeds with breaker ignition and indicator system.
Models that were equipped with indicators as standard (e.g. DE) do not have the condenser mounted under the pole wheel as usual, on these vehicles the condenser is screwed on from the outside with the corresponding engine housing.
Notes:
The red cable with the &p>wire goes to the breaker, the blue cable with the flat plug goes to the ignition coil.
Figure 3 shows you for which ignition the capacitor is required. Figures 4 and 5 show you where the capacitor is located on the motor housing.
| Manufacturer | EFFE |
| Capacity | 0.28 µF |
| Mounting type | Tab for screwing |
| Ø outside | 18 mm |
| Connection type | Cable for screwing |
| Ø mounting hole | 4.4 mm |
| Area of application | Standard |
| Total height | 27 mm |
| Piaggio OEM number | 187555 |
| Piaggio | Si Bravo / Super Bravo |
Accessories & related products
Hot 
swiing® ingenious puller flywheel | Piaggio Ciao, SI, Bravo, Boxer
Width across flats trigger: 10 mm · Width across flats trigger: 17 mm · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: blackened · Surface: galvanized (blue) · Number of components: 3 pcs · Total length: 100 mm · Thread type: MF12x1.5 (fine pitch thread) · Thread type: MF17x1 (fine pitch thread) · Diameter: 12 mm · Diameter: 24 mm · Area of application: (Dis)assembly tool · Width across flats Screw: 19 mm
EUR 21,10
M3x8 Screw for Capacitor & Ignition Cable (Original) | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Piaggio · Material: Steel · Surface: galvanized (blue) · Thread type: M3x0.5 (standard thread) · Nominal diameter (thread): 3 mm · Drive: Slot · Screw head: Cylinder head · Ø External head: 5.5 mm · Total length: 9.7 mm · Thread length: 8 mm · Strength class: 4.8 · Piaggio OEM number: S.10051 · Piaggio OEM number: S838 · Piaggio OEM number: 002/000838
EUR 1,05
Moped fans also bought
Hot
BOSCH breaker with cable | Bosch / Ducati
Ø mounting hole: 4.5 mm · Manufacturer: BOSCH · Material: Steel · Area of application: Original · Area of application: Standard · Cable available: Yes · Ø axle: 4 mm · Ø Internal flywheel: 90 mm · Cable length: 100 mm · Number of fixing points: 1 pcs · Alternative version of the Pony OEM number: A4606 · Alternative version of the Pony OEM number: A4606A · Pony OEM number: A4607 · Sachs OEM no.: 0283 116 102 · Alternative version of the Sachs OEM number: 0983 106 000 · Alternative version of the Sachs OEM number: 2783 039 001 · BOSCH OEM number: 1 217 013 025 · BERU OEM number: 0 340 100 710
EUR 23,40
Screw M6x16 pan-head cross galvanized
Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Drive: Cross recess · Screw head: Lens head · Ø External head: 12 mm · Total length: 20.6 mm · Thread length: 16 mm · Shank: No · Strength class: 4.8 · Number of components: 1 pcs
EUR 2,00
Screw M4x8 cylinder head slot galvanized
Material: Steel · Surface: galvanized (blue) · Thread type: M4x0.7 (standard thread) · Nominal diameter (thread): 4 mm · Drive: Slot · Screw head: Cylinder head · Ø External head: 6.9 mm · Total length: 11 mm · Thread length: 8 mm · Number of components: 1 pcs
EUR 0,70
OMG fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: OMG · Material: Aluminum · Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Aluminum · Filter type: Plastic net · Outer width: 18 mm · Installation direction: vertical / vertical · Outlet direction: below · Spare tube shape: curved · Mounting type: screw in (thread) · Ø fuel hose connection: 6 mm · Reserve level: 60 mm
EUR 15,20
Working late? Evening hours on Thursday until 20:00
