This permanent marker is suitable for marking or repairing small damaged areas and should therefore not be missing in any moped, moped or motorcycle workshop.
This paint marker was designed for smooth surfaces such as glass, metal or plastic.
Color: gold
Strike width: 2 - 4 mm
Tip: round tip
Water-resistant
Abrasion-resistant
Heat-resistant up to 400°C
Note: Before use, the permanent pen should be shaken briefly with the cap on and then the tip should be carefully pumped up and down on a test paper until color fills the tip.
Further variants of waterproof pens can be found in the accessories section.
Quality product from the German manufacturer edding.
| Temperature resistance (min.) | 0 - 400 °C |
| Manufacturer | edding |
| Area of application | Paint & varnish |
| Color | gold |
| Line width | 2 - 4 |
Accessories & related products
Explore categories from Miscellaneous
Moped fans also bought
Hot 
swiing® ingenious exhaust 22 mm camouflaged 2-piece | Puch Maxi S, N
Material: Steel · Surface: chrome-plated · Manufacturer: swiing® ingenious parts · Ø outside: 59 mm · Total length: 910 mm · Color: Chrome · Ø Silencer: 54.5 mm · Ø Flame tube outside: 22 mm · Exhaust type: Flute · Mounting type: Stud bolts & nuts · Mounting type: Welded lug · Number of fixing points: 4 pcs · Flame tube attachment: Flange
EUR 158,70
Inox
Hot
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Width: 105 mm · Thread type: M5x0.8 (standard thread) · Height: 5.3 mm · Total length: 145 mm · Ø mounting hole: 5 mm · Thread length: 8 mm · Mounting type: Nuts & bolts · Hole spacing: 30 mm · Hole spacing: 50 mm · Number of fixing points: 2 pcs
EUR 12,80
Hot
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Thread type: MF12x1 (fine pitch thread) · Mounting type: Union nut · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
EUR 11,70
Dell'Orto 16/16 SHA carburetor hand choke
Carburetor type: SHA · Nominal diameter: 16 mm · Manufacturer: Dell'Orto · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Ø without reducing sleeve: 21 mm · Height: 111 mm · Ø Inside entrance: 16 mm · Ø Output inside: 16 mm · Color: black · Ø Air filter connection: 56 mm · Ø Air filter connection: 58.5 mm · Ø Internal connection: 19 mm · Ø fuel hose connection: 5.1 mm · Ø fuel hose connection: 6 mm · Total length: 82 mm · Mixed oil connection: No · Vacuum connection: No · Width: 72 mm · Choke control: Hand choke · Mounting type: Plug connection clamped · Nozzle thread: M5x0.8 (standard thread) · Area of application: Tuning · Nozzle size: 82
EUR 82,30
GPO sprocket 9 - 21 teeth wide | Puch
Manufacturer: GPO · Material: Steel · Surface: Hardened · Chain type: 415H · Number of teeth: 9 pcs · Number of teeth: 10 pcs · Number of teeth: 11 pcs · Number of teeth: 12 pcs · Number of teeth: 13 pcs · Number of teeth: 14 pcs · Number of teeth: 15 pcs · Number of teeth: 16 pcs · Number of teeth: 17 pcs · Number of teeth: 18 pcs · Number of teeth: 19 pcs · Number of teeth: 20 pcs · Number of teeth: 21 pcs · Chain pitch: 1/2" x 3/16" · Recording type: Interlocking · Total thickness: 4.6 mm
EUR 9,30
Working late? Evening hours on Thursday until 20:00
