45.0 mm replacement piston with two 1.5 mm rectangular piston rings with flank lock (FS) to fit the 45 mm DMP cylinder for various Puch mopeds / mopeds.
The detailed dimensions of the piston according to the technical drawing can be found in the details. You can also find out about the common piston rings, their stems and locking types on the legend in the pictures.
The piston kit contains piston pins, piston clips and piston rings.
You will find the corresponding assembly tools, piston rings, piston pin retainers etc. in the accessories section.
Branded product from the manufacturer DMP.
| Manufacturer | DMP |
| Ø outside piston (A) | 44.91 mm |
| Compression height (C) | 23.1 mm |
| Curvature (D) | 2.9 mm |
| Total piston height (E) | 52 mm |
| Number of piston rings (F) | 2 pcs |
| Piston ring mold | Rectangular ring |
| Nominal diameter | 45 mm |
| Piston ring impact | Flank safety device (FS) |
| Piston ring height | 1.5 mm |
| Ø piston pin (B) | 12 mm |
| Weight piston kit | 92 g |
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Ratings
Accessories & related products
GPO 45 mm cylinder kit 70 ccm | Puch
Nominal diameter: 45 mm · Material: Aluminum · Number of fixing points: 4 pcs · Manufacturer: GPO · Surface: sandblasted · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 47.8 mm · Ø outlet inside: 24.6 mm · Inlet window: 21.8 x 14.6 · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Area of application: Tuning · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: No
EUR 118,30
GPO piston pin extractor Ø 10, 12, 14 mm
Manufacturer: GPO · Material: Steel · Surface: burnished · Area of application: (Dis)assembly tool · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Number of components: 7 pcs · Total length: 130 mm · Width across flats: 10 mm · Width across flats: 17 mm
EUR 23,60
Moped fans also bought
GPO 15 mm carburetor tuning | Puch
Nominal diameter: 15 mm · Manufacturer: GPO · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Total length: 66 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: No · Nozzle size: 62 · Area of application: Tuning · Clamping screw torque (max.): 4 N/m · Width: 50 mm · Height: 95 mm
EUR 76,90
Not so nice 
15 mm intake manifold | Puch E50
Material: Aluminum · Camouflaged: Yes · Area of application: Tuning · Mounting type: Screws · Ø inside: 14.5 mm · Ø External connection: 20 mm · Hole spacing inlet: 38 mm · Total height: 54 mm · Number of fixing points: 2 pcs · Height flange center hole: 43 mm · Total length: 47 mm
EUR 14,10
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Width across flats trigger: 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Material: Steel · Surface: blackened · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Total length: 55 mm · Total length: 75 mm · Number of components: 1 pcs · Strength class: 8.8 · Area of application: (Dis)assembly tool
EUR 11,70
Airsal gasket set 44 - 45 mm
Manufacturer: Airsal · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Ø cylinder: 44 mm · Ø cylinder: 45 mm · Number of components: 4 pcs · Hole spacing inlet: 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Area of application: Tuning
EUR 11,70
swiing® ingenious gasket set 44 - 45 mm cylinder | Puch
Manufacturer: swiing® ingenious parts · Ø cylinder: 44 mm · Ø cylinder: 45 mm · Number of components: 4 pcs · Hole spacing inlet: 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Area of application: Tuning
EUR 11,70
Nut M10x1 SW14 Flywheel
Manufacturer: GPO · Ø outside: 18.8 mm · Material: Steel · Surface: galvanized (blue) · Thread type: MF10x1 (fine pitch thread) · Nut type: Flange nut · Width across flats: 14 mm · Drive: External hexagon · Height: 8.9 mm · Area of application: Standard · Pony OEM number: A4513 · Sachs OEM no.: 0942 072 102
EUR 2,85
Collection only possible with online purchase and appointment.
