All wish lists
Carousel Image 1
Carousel Image 2
Carousel Image 3
Carousel Image 4
logo_dellorto

Universal

21388

Dell'Orto 15 mm PHBG AS carburetor hand choke

EUR 152,50

Incl. 20% VAT.

Product description

15 mm PHBG racing carburetor for universal use for your moped, moped and small motorcycle.
This high-quality racing carburetor is suitable for tuning and is designed for racing bikes between 50 and 70 cc.

The tuning carburetor has a manually operated choke (starter slide / starter flap).
The fuel/air mixture can be perfectly adjusted using the main and secondary lines and the mixture adjustment screw.

The carburetor has an M32x1.25 thread on the air filter side. The air filter can be attached directly to the thread.

Main thread size (M5): 70 (with throttle plate)
Adjacent thread size (idle thread): 50
Choked thread size: 60
Air filter connection diameter: 32 mm (M32 x 1.25)
Intake port connection diameter: 24 mm (or 26 mm after removing the reducing sleeve)
Total height: 125 mm
Total width: 75 mm

Matching nozzles, air filters and intake manifolds can be found in the accessories section.

Quality product from the Italian manufacturer Dell'Orto.

Width75 mm
ManufacturerDell'Orto
Component group CarburetorCarburetor complete
Area of applicationTuning
Carburetor typePHBG AS
Nominal diameter15 mm
Nozzle size70
Ø without reducing sleeve26 mm
Ø Internal connection24 mm
Mounting typePlug connection clamped
Ø Air filter connection32 mm
Air filter connection threadMF32x1.25 (fine pitch thread)
Ø fuel hose connection6 mm
Height125 mm
Choke controlHand choke
Choke nozzle size60
Nozzle threadM5x0.8 (standard thread)
Size of secondary nozzle50

Accessories & related products

18.5 mm intake manifold Dell'Orto PHBG | Puch E50

For: Puch

10659

18.5 mm intake manifold Dell'Orto PHBG | Puch E50

Ø inside: 18.8 mm · Total height: 57 mm · Material: Aluminum · Surface: polished · Color: Chrome · Area of application: Tuning · Ø External connection: 23.9 mm · Total length: 40 mm · Number of fixing points: 2 pcs · Mounting type: Screws · Height flange center hole: 45 mm · Hole spacing inlet: 38 mm · Camouflaged: No

EUR 21,00

Gas cable Ø 1.2 mm x 165 cm (nipple ball) Dell'Orto
undefined

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Piaggio · Tomos · Cilo · Hercules

10703

Gas cable Ø 1.2 mm x 165 cm (nipple ball) Dell'Orto

Ø Stranded wire: 1.2 mm · Nipple shape: Ball · Ø nipple: 3.5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Cable length: 1650 mm · Number of components: 1 pcs

EUR 3,30

swiing® revival nozzle set M5 (70 - 92) Dell'Orto SHA, PHBG
undefined

For: Universal · Pony / Cilo (Beta 521 & 512) · Piaggio

10902

swiing® revival nozzle set M5 (70 - 92) Dell'Orto SHA, PHBG

Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Drive: Slot · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 75 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92 · Total length: 8 mm · Nozzle thread: M5x0.8 (standard thread)

EUR 24,50

swiing® revival nozzle set M5 (92 - 110) Dell'Orto SHA, PHBG
undefined

For: Universal · Pony / Cilo (Beta 521 & 512) · Piaggio

10903

swiing® revival nozzle set M5 (92 - 110) Dell'Orto SHA, PHBG

Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Drive: Slot · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98 · Nozzle size: 100 · Nozzle size: 102 · Nozzle size: 104 · Nozzle size: 106 · Nozzle size: 108 · Nozzle size: 110 · Total length: 8 mm · Nozzle thread: M5x0.8 (standard thread)

EUR 24,50

swiing® revival nozzle set M5 (80 - 100) Dell'Orto SHA, PHBG
undefined

For: Universal · Pony / Cilo (Beta 521 & 512) · Piaggio

17985

swiing® revival nozzle set M5 (80 - 100) Dell'Orto SHA, PHBG

Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Total length: 8 mm · Drive: Slot · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98 · Nozzle size: 100

EUR 24,50

swiing® revival nozzle M5 (30 - 120 of your choice) Dell'Orto SHA, PHBG
undefined
angle-right

For: Universal · Pony / Cilo (Beta 521 & 512) · Piaggio · Tomos

22000

swiing® revival nozzle M5 (30 - 120 of your choice) Dell'Orto SHA, PHBG

Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Total length: 8 mm · Drive: Slot · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 30 · Nozzle size: 31 · Nozzle size: 32 · Nozzle size: 33 · Nozzle size: 34 · Nozzle size: 35 · Nozzle size: 36 · Nozzle size: 37 · Nozzle size: 38 · Nozzle size: 39 · Nozzle size: 40 · Nozzle size: 41 · Nozzle size: 42 · Nozzle size: 43 · Nozzle size: 44 · Nozzle size: 45 · Nozzle size: 46 · Nozzle size: 47 · Nozzle size: 48 · Nozzle size: 49 · Nozzle size: 50 · Nozzle size: 51 · Nozzle size: 52 · Nozzle size: 53 · Nozzle size: 54 · Nozzle size: 55 · Nozzle size: 56 · Nozzle size: 57 · Nozzle size: 58 · Nozzle size: 59 · Nozzle size: 60 · Nozzle size: 61 · Nozzle size: 62 · Nozzle size: 63 · Nozzle size: 64 · Nozzle size: 65 · Nozzle size: 66 · Nozzle size: 67 · Nozzle size: 68 · Nozzle size: 69 · Nozzle size: 70 · Nozzle size: 71 · Nozzle size: 72 · Nozzle size: 73 · Nozzle size: 74 · Nozzle size: 75 · Nozzle size: 76 · Nozzle size: 77 · Nozzle size: 78 · Nozzle size: 79 · Nozzle size: 80 · Nozzle size: 81 · Nozzle size: 82 · Nozzle size: 83 · Nozzle size: 84 · Nozzle size: 85 · Nozzle size: 86 · Nozzle size: 87 · Nozzle size: 88 · Nozzle size: 89 · Nozzle size: 90 · Nozzle size: 91 · Nozzle size: 92 · Nozzle size: 93 · Nozzle size: 94 · Nozzle size: 95 · Nozzle size: 96 · Nozzle size: 97 · Nozzle size: 98 · Nozzle size: 99 · Nozzle size: 100 · Nozzle size: 101 · Nozzle size: 102 · Nozzle size: 103 · Nozzle size: 104 · Nozzle size: 105 · Nozzle size: 106 · Nozzle size: 107 · Nozzle size: 108 · Nozzle size: 109 · Nozzle size: 110 · Nozzle size: 111 · Nozzle size: 112 · Nozzle size: 113 · Nozzle size: 114 · Nozzle size: 115 · Nozzle size: 116 · Nozzle size: 117 · Nozzle size: 118 · Nozzle size: 119 · Nozzle size: 120

EUR 4,10

Dell'Orto choke nozzle 60 PHBG 15 - 21 mm
undefined

Universal

23762

Dell'Orto choke nozzle 60 PHBG 15 - 21 mm

Manufacturer: Dell'Orto · Material: Brass · Component group Carburetor: Spraying · Carburetor type: PHBG · Nozzle type: Choke nozzle · Drive: Slot · Nozzle size: 60

EUR 12,80

66HEROES Air filter mushroom grille black Dell'Orto PHBG (Ø=28 mm)
undefined

Universal

25363

66HEROES Air filter mushroom grille black Dell'Orto PHBG (Ø=28 mm)

Manufacturer: 66HEROES · Area of application: Tuning · Filter type: Grille · Ø outside: 60 mm · Ø Internal connection: 28 mm · Total length: 70 mm · Mounting type: Plug connection clamped · Color: black · Camouflaged: No

EUR 22,20

Not in stock

66HEROES Mushroom air filter grille 28 - 32 mm black
undefined

Universal

26152

66HEROES Mushroom air filter grille 28 - 32 mm black

Manufacturer: 66HEROES · Material: Metal · Material: Rubber · Area of application: Tuning · Filter type: Grille · Ø outside: 60 mm · Ø Internal connection: 28 mm · Ø Internal connection: 32 mm · Total length: 114 mm · Mounting type: Plug connection clamped · Color: black · Camouflaged: No

EUR 18,70

Not in stock

Dell'Orto secondary nozzle PHBG (size 30 - 70) of your choice
undefined
angle-right

Universal

27204

Dell'Orto secondary nozzle PHBG (size 30 - 70) of your choice

Manufacturer: Dell'Orto · Material: Brass · Component group Carburetor: Spraying · Carburetor type: PHBG · Nozzle type: Secondary nozzle · Drive: Slot · Nozzle size: 30 · Nozzle size: 35 · Nozzle size: 40 · Nozzle size: 45 · Nozzle size: 50 · Nozzle size: 55 · Nozzle size: 60 · Nozzle size: 65 · Nozzle size: 70

EUR 5,75

Moped fans like you also bought:

Magura lever screw M5x18 mm
undefined

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Zündapp Belmondo · Cilo

10387

Magura lever screw M5x18 mm

Manufacturer: Magura · Material: Steel · Surface: galvanized (blue) · Color: silver · Ø shaft: 5.9 mm · Total length: 21.5 mm · Ø External head: 8.8 mm · Width across flats SW: 8 mm · Shank length: 9 mm · Drive: External hexagon · Drive: Slot · Thread type: M5x0.8 (standard thread) · Thread length: 8.5 mm

EUR 3,40

swiing® revival nozzle set M5 (70 - 92) Dell'Orto SHA, PHBG
undefined

For: Universal · Pony / Cilo (Beta 521 & 512) · Piaggio

10902

swiing® revival nozzle set M5 (70 - 92) Dell'Orto SHA, PHBG

Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Drive: Slot · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 75 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92 · Total length: 8 mm · Nozzle thread: M5x0.8 (standard thread)

EUR 24,50

NSK BO15 shoulder ball bearing 15/40/10 (A4502)
undefined

For: Sachs

11990

NSK BO15 shoulder ball bearing 15/40/10 (A4502)

Bearing cage: Brass cage ball-guided · Ø inside: 15 mm · Ø outside: 40 mm · Width: 10 mm · Inner ring width: 10 mm · Manufacturer: NSK · Material: Brass · Material: Steel · Surface: blank · Stock number: BO15 · Area of application: Standard · Bearing type: Shoulder bearing · Ball bearing closed: No · Pony OEM number: A4502 · Sachs OEM no.: 0932 007 001

EUR 29,20

swiing® revival engine seal | Sachs 503 AAL, ABL, AB, AC, ADV, 2AL, 2BL (A1884)
undefined

For: Sachs

11995

swiing® revival engine seal | Sachs 503 AAL, ABL, AB, AC, ADV, 2AL, 2BL (A1884)

Ø inside: 87 mm · Total length: 233 mm · Width: 140 mm · Thickness: 0.4 mm · Manufacturer: swiing® revival parts · Number of fixing points: 9 pcs · Material: Sealing paper · Number of components: 1 pcs · Color: sand-colored · Pony OEM number: A1884 · Sachs OEM no.: 0250 149 100

EUR 6,35

swiing® revival cylinder base gasket | Sachs 503 AB / AC / ADV
undefined

For: Sachs

12002

swiing® revival cylinder base gasket | Sachs 503 AB / AC / ADV

Place of use: Cylinder base · Ø inside: 56 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Area of application: Standard · Nominal diameter: 38 mm · Thickness: 0.4 mm · Hole pattern [mm]: 55 x 55

EUR 5,15

Cable sheath Ø 6 mm black (per meter) PTFE inner sheath

Universal

27984

Cable sheath Ø 6 mm black (per meter) PTFE inner sheath

Ordering unit: Per meter · Ø inside: 2.6 mm · Coating: PTFE · Ø outside: 6 mm · Ø cable: 2.4 mm · Total length: 1000 mm · Color: black

EUR 3,40

EUR 3,40/m

Cable sheath Ø 6 mm black (50 meter roll) PTFE inner sheath

Universal

27985

Cable sheath Ø 6 mm black (50 meter roll) PTFE inner sheath

Coating: PTFE · Ordering unit: Roll 50 meters · Ø cable: 2.4 mm · Ø inside: 2.6 mm · Ø outside: 6 mm · Color: black · Total length: 50000 mm

EUR 69,20

Inner cable Ø 2.0 mm 50 meter roll

Universal

27991

Inner cable Ø 2.0 mm 50 meter roll

Ø Stranded wire: 2 mm · Cable length: 50000 mm · Material: Steel · Area of application: Standard

EUR 29,20

EUR 0,58/m

Cable end sleeve 6 mm nickel-plated
undefined

Universal

28001

Cable end sleeve 6 mm nickel-plated

Manufacturer: Made in Portugal · Material: Brass · Surface: nickel-plated · Ø inside: 6 mm · Ø Cable bushing: 3 mm · Ø outside: 6.5 mm · Total length: 12 mm

EUR 0,60