Bing SSE 15 mm aftermarket tuning carburetor suitable for ILO / JLO mopeds / mopeds.
The racing carburetor also fits Puch MS, VS, MV and DS small engine bikes, provided the additional flange (item 23645) is used.
If necessary, small adjustments are required to ensure the air filter fits perfectly.
We recommend the adjustable nozzle (item 16038), which allows the fuel/air mixture to be optimally adjusted.
Hole spacing for cylinder connection: 32 mm
Main diameter: 14
You can find the slanted intake manifold described above, other carburetors and the innovative adjustable nozzle in the accessories section.
| Component group Carburetor | Carburetor complete |
| Area of application | Standard, Tuning |
| Carburetor type | SSE |
| Hole spacing inlet | 32 mm |
| Nominal diameter | 15 mm |
| Ø fuel hose connection | 6 mm |
| Mounting type | Flange |
| Choke control | Cable choke |
| Puch | 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
| ILO / JLO |
Accessories & related products
BING SSE carburetor 12 mm | Puch MV 50, MS 50
Nominal diameter: 12 mm · Component group Carburetor: Carburetor complete · Carburetor type: SSE · Mounting type: Flange · Hole spacing inlet: 32 mm · Area of application: Standard · Area of application: Tuning · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle size: 50
EUR 93,70
BING Original floats Bing SSB, SSE & SSN
Carburetor type: SSB · Carburetor type: SSE · Carburetor type: SSN · Ø outside: 22 mm · Total length: 41.4 mm · Color: black · Manufacturer: BING · Component group Carburetor: Adjusting screws, float, etc. · Height: 23 mm · Pony OEM number: A1968 · Sachs OEM no.: 0261 003 001
EUR 33,90
Flange intake manifold angled with stud bolt | Puch MS, VS, MV and DS
Material: Aluminum · Ø inside: 15 mm · Mounting type: Stud bolts & nuts · Hole spacing inlet: 32 mm · Number of fixing points: 2 pcs · Total height: 2.7 mm · Total height: 9.7 mm · Thread type: M6x1 (standard thread) · Area of application: Tuning
EUR 31,10
BING SSE carburetor 12 mm cable choke | ILO / Puch MV, MS, DS
Component group Carburetor: Carburetor complete · Carburetor type: SSE · Nominal diameter: 12 mm · Ø Inside entrance: 12 mm · Ø Output inside: 12 mm · Ø fuel hose connection: 6 mm · Choke control: Cable choke · Nozzle size: 50 · Mounting type: Flange · Hole spacing inlet: 32 mm · Area of application: Standard · Area of application: Tuning
EUR 100,70
Moped fans also bought
swiing® revival gasket set Z50 engine | Puch X30 NS / NL
Manufacturer: swiing® revival parts · Number of components: 10 pcs · Material: Sealing paper · Area of application: Standard · Hole spacing inlet: 32 - 38 mm · Ø outlet inside: 22 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44
EUR 23,30
GPO 45 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Camouflaged: Yes · Area of application: Tuning · Surface: sandblasted · Width: 125 mm · Ø cylinder: 45 mm · Total length: 135 mm · Height: 55 mm · Number of fixing points: 4 pcs · Candle thread: short · Hole pattern [mm]: 44 x 44 · Decompressor: No
EUR 38,60
swiing® revival wheel nut M10.5x1 x 10 SW17 coaster brake Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Surface: blank · Nut type: Hexagon nut 1D · Drive: External hexagon · Height: 10 mm · Thread type: MF10.5x1 (fine pitch thread) · Area of application: Standard · Width across flats SW: 17 mm
EUR 8,10
NSK E15 shoulder ball bearing 15/35/8 (A1149)
Bearing cage: Brass cage ball-guided · Ø inside: 15 mm · Ø outside: 35 mm · Inner ring width: 8 mm · Manufacturer: NSK · Bearing clearance: CN (standard) · Groove ring: No · Material: Brass · Material: Steel · Surface: blank · Area of application: Standard · Bearing type: Shoulder bearing · Width: 8 mm · Stock number: E15 · Ball bearing closed: No · Pony OEM number: A1149 · Sachs OEM no.: 0232 017 006
EUR 29,20
Flange intake manifold angled with stud bolt | Puch MS, VS, MV and DS
Material: Aluminum · Ø inside: 15 mm · Mounting type: Stud bolts & nuts · Hole spacing inlet: 32 mm · Number of fixing points: 2 pcs · Total height: 2.7 mm · Total height: 9.7 mm · Thread type: M6x1 (standard thread) · Area of application: Tuning
EUR 31,10
Collection only possible with online purchase and appointment.
