Cable duct made of dark gray plastic for Puch Maxi S, N and Supermaxi LG1, LG2 mopeds / mopeds.
The cable tunnel is mounted underneath the tank and ensures clean routing of all cables. Throttle and clutch cables are pulled through the side openings of the cable cover.
Further cable guides in various colors can be found in the accessories section.
Details
| Total length | 320 mm |
| Material | Plastic |
| Color | gray |
| Width | 58 mm |
| Ø mounting hole | 5.3 mm |
| Number of fixing points | 2 pcs |
| Height | 22 mm |
Suitable for the following models
| Puch | E50 ZA50 (air-cooled) |
Accessories & related products
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: silver · Thread type: M5x0.8 (standard thread) · Drive: Slot · Drive: Triangular head · Total length: 47 mm · Total length: 60 mm · Thread length: 35 mm · Thread length: 50 mm
EUR 14,90
swiing® revival side protection screw set chrome | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: galvanized (blue) · Color: Chrome · Color: silver · Thread type: M5x0.8 (standard thread) · Drive: Slot · Drive: Triangular head · Total length: 48 mm · Total length: 63 mm · Thread length: 35 mm · Thread length: 50 mm
EUR 17,30
Moped fans like you also bought:
swiing® revival Bing float needle (with penetration) SRE, SRC, SRF, SRA, 85, 18
Total length: 12 mm · Width: 3.3 mm · Manufacturer: swiing® revival parts · Component group Carburetor: Adjusting screws, float, etc. · Material: Aluminum · Material: Rubber · Color: black · Color: silver · Surface: blank · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Carburetor type: 18 Catalyst · Carburetor type: 85 · Ø outside: 2.6 mm · Ø outside: 4 mm · Alternative version of the Pony OEM number: A4595A · Alternative version of the Sachs OEM number: Bing 47-032
EUR 7,95
Not so nice 
15 mm intake manifold | Puch E50
Area of application: Tuning · Material: Aluminum · Ø External connection: 20 mm · Total length: 47 mm · Number of fixing points: 2 pcs · Mounting type: Screws · Total height: 54 mm · Ø inside: 14.5 mm · Height flange center hole: 43 mm · Camouflaged: Yes · Hole spacing inlet: 38 mm
EUR 13,90
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Total length: 135 mm · Width: 125 mm · Height: 55 mm · Manufacturer: GPO · Area of application: Standard · Material: Aluminum · Surface: sandblasted · Ø cylinder: 38 mm · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Candle thread: short · Decompressor: No
EUR 38,00
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Color: black · Surface: powder-coated · Number of teeth: 45 pcs · Number of fixing points: 6 pcs · Ø bolt circle: 105.5 mm · Hole spacing: 36.5 mm · Hole spacing 2: 68 mm · Thickness: 4.5 mm · Cranking (offset): 8 mm · Ø inside: 94 mm · Ø mounting hole: 6.7 mm
EUR 23,00
GPO tail light ULO | Puch Maxi N, S old version
Width: 60 mm · Height: 110 mm · Manufacturer: GPO · Test mark: none · Bulb holder: BA15s · Material: Plastic · Color: black · Color: red · Tension: 6 V · Number of fixing points: 2 pcs · Depth: 80 mm · Mounting type: Nuts & bolts · Brake light: No · Battery operated: No · Ø Receptacle: 4 mm · Reflectors: Yes
EUR 42,20
swiing® revival screw set sprocket mounting galvanized | Puch Maxi
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Color: silver · Number of components: 24 pcs · Thread type: M6x1 (standard thread) · Drive: External hexagon · Screw head: Hexagon · Thread length: 22 mm · Shank: No · Width across flats SW: 10 mm · Strength class: 8.8
EUR 9,10
Collection only possible with online purchase and appointment.
