Unshielded spark plug connector made of hard plastic for your moped, scooter, and small motorcycle.
Solid housing made of phenolic resin (commonly known as Bakelite). The synthetic resin is resistant to heat, acid, and mechanical friction.
The spark plug wire is inserted into the guide. The pointed pin is screwed into the spark plug hole, thereby securing the spark plug wire.
Since the spark plug connector features a 6 mm SAE clamp mount, the end cap remains attached to the spark plug.
Fits spark plug wires up to a maximum diameter of 7 mm.
When using an electronic ignition system (HPI, PVL, Selettra, etc.), a noise-suppressed spark plug cap should be used.
You can find spark plugs, ignition wires, and alternative spark plug connectors compatible with this spark plug holder in the accessories section.
A German-made, high-quality product from BERU in OEM quality.
| Manufacturer | BERU |
| Material | Phenolic resin (colloquially known as Bakelite) |
| Color | black |
| Spark plug socket | SAE |
| Cable available | No |
| Suppressed | No |
| Subcategory | Spark plug connector |
| Ø cable | 5 mm, 7 mm |
Accessories & related products
Nos
Hot 
BERU Spark Plug Connector, 1 kΩ, Noise-Suppressed, NOS
Manufacturer: BERU · Material: Sheet metal (steel) · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Subcategory: Spark plug connector · Ø cable: 5 mm · Ø cable: 7 mm · Color: silver · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 11,70
Moped fans also bought
Hot
KMC drive chain 415H (reinforced) 128L
Ø bore: 4 mm · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Number of chain links: 128 pcs · Chain type: 415H · Chain lock type: Spring lock · Chain pitch: 1/2" x 3/16" · Rolling circumference: 1626 mm · Color: gray · Ø Pin: 3.94 mm
EUR 14,70
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Area of application: Standard · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Ø outside: 8 mm · Total length: 15 mm · Thread length: 7 mm · Thread type: M6x1 (standard thread) · Ø Bundle: 6 mm · Width across flats: 7 mm
EUR 2,95
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Area of application: Tuning · Number of components: 3 pcs · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Total length: 28 mm · Color: blue
EUR 21,10
Hot
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Diameter: 5.95 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nominal diameter (thread): 6 mm · Total length: 30 mm · Thread length: 12 mm · Thread type: M6x1 (standard thread) · Strength class: 10.9
EUR 2,10
Hot
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Number of components: 1 pcs · Ø Stranded wire: 1.8 mm · Cable length: 2200 mm · Nipple shape: Pears
EUR 2,80
Nut flywheel M10x1 SW15 serrated
Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Nut type: Flange nut · Drive: External hexagon · Nominal diameter (thread): 10 mm · Ø outside: 19.8 mm · Thread type: MF10x1 (fine pitch thread) · Height: 10.5 mm · Width across flats: 15 mm
EUR 3,40
Working late? Evening hours on Thursday until 20:00
