Gasket set for original 38 mm cylinders which were installed on the engine of your Puch Maxi P & K moped / moped.
The gasket set contains the following gaskets:
Quality product from the Italian manufacturer Athena.
Thickness | 1.25 mm, 0.4 mm, 0.7 mm |
Manufacturer | Athena |
Number of components | 6 pcs |
Material | Aluminum, Sealing paper, Sealing carton |
Ø cylinder | 38 mm, 40 mm |
Puch |
Accessories & related products
GPO gasket set | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Ø outlet inside: 19.9 mm · Area of application: Standard · Hole spacing inlet: 32 - 38 mm · Number of components: 7 pcs · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes
EUR 11,70
GPO gasket set cylinder original | Puch Maxi S, N / X30 NS, NL, N-2AH
Thickness: 0.3 mm · Thickness: 0.4 mm · Thickness: 1.8 mm · Manufacturer: GPO · Number of components: 4 pcs · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Ø cylinder: 38 mm · Ø outlet inside: 22 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Area of application: Standard · Hole spacing inlet: 32 - 38 mm · Decompressor: Yes
EUR 7,65
EUR 8,70
Dirko Dichtmasse rot (Silikon) Hochtemperatur 70 ml dauerelastisc
Manufacturer: Elring · Contents [ml]: 70 ml · Hazard warning: Causes serious eye irritation · Color: red · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Temperature resistance (min.): -60 - 300 °C · Area of application: Chemistry · Gap dimension (max.): 2 mm
EUR 27,00
EUR 385,71/l
swiing® revival gasket set cylinder | Puch Supermaxi LG1, LG2 (Cat)
Manufacturer: swiing® revival parts · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Ø cylinder: 38 mm · Number of components: 4 pcs · Ø outlet inside: 22 mm · Hole pattern [mm]: 44 x 44 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 - 44 mm · Decompressor: No · Area of application: Standard
EUR 12,80
Moped fans also bought
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Ø cable: 5 mm · Ø cable: 7 mm · Spark plug socket: M4 · Cable available: No · Color: silver · Suppressed: Yes · Resistance: 1000 Ω · Component group Carburetor: Spark plug connector · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 10,40
Magura cable clamp Ø 8 x 15 mm
Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Width across flats SW: 7 mm · Thread type: M6x1 (standard thread) · Manufacturer: Magura · Thread length: 7 mm · Ø Cable bushing: 2.3 mm · Ø Bundle: 6 mm · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Ø outside: 8 mm · Total length: 15 mm · Area of application: Standard
EUR 2,95
GPO clutch 3-jaw aluminum | Puch E50
Manufacturer: GPO · Material: Aluminum · Area of application: Original · Area of application: Standard · Material: Steel · Material addition: Composite materials · Ø inside: 12 mm · Ø inside: 14.6 mm · Recording type: Cone mounting · Ø outside: 93 mm · Number of jaws: 3 pcs · Number of springs: 3 pcs · Thickness: 20.9 mm
EUR 58,80
Not in stock
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Nipple length: 5 mm · Area of application: Standard
EUR 3,30
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Thread type: MF12x1 (fine pitch thread) · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
EUR 11,70
swiing® revival seal Float SRE, SRC, SRF, SRA
Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Thickness: 1.5 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Component group Carburetor: Sealing, revising · Surface: blank · Ø inside: 41 mm · Ø outside: 45 mm · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
EUR 3,30
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Drive: Slot · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Manufacturer: Magura · Thread length: 4 mm · Ø Cable bushing: 1.6 mm · Number of components: 2 pcs · Material: Brass · Material: Steel · Surface: nickel-plated · Ø outside: 5 mm · Total length: 6 mm
EUR 2,35
GPO gasket set carburetor Bing SRE
Carburetor type: SRE · Thickness: 0.5 mm · Thickness: 0.9 mm · Thickness: 1.5 mm · Manufacturer: GPO · Material: Sealing paper · Component group Carburetor: Sealing, revising · Ø inside: 7.8 mm · Ø inside: 41 mm · Ø outside: 12.2 mm · Ø outside: 45 mm · Camouflaged: No
EUR 5,75
Karcoma fuel filter plastic small
Manufacturer: Karcoma · Material: Plastic · Ø inside: 3 mm · Ø outside: 20 mm · Filter type: Plastic net · Total length: 23.4 mm · Total length: 50 mm · demountable: No · Color: transparent · Color: white · Ø fuel hose connection: 4.9 mm · Ø fuel hose connection: 6 mm
EUR 6,85
Inner cable set automatic | Puch E50
Manufacturer: Made in Germany · Material: Steel · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Quantity: 4 pcs · Total length: 1600 mm · Total length: 2200 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
EUR 11,70