High-quality clutch spring set for various 3-jaw tuning clutches suitable for your Puch Maxi S / N, Puch Supermaxi LG1 mopeds / mopeds which have an E50 input engine with roller clutch installed.
The reinforced springs with a spring force of 50 N/mm increase the clutch engagement speed and thus ensure better starting behavior on inclines.
The set contains 3 pieces of springs to equip a complete clutch.
You can find complete clutches, aramid linings or other spring bars in the accessories section.
Quality product from the Austrian manufacturer A.S.P - Puch Parts.
Manufacturer: ASP · Material: Spring steel · Area of application: Tuning, Racing · Spring design: Pressure spring · Spring rate: 50 N/mm · Ø wire: 1.8 mm · Ø inside: 4.6 mm · Ø outside: 8.2 mm · Total length: 27 mm · Number of components: 1 pcs
| Spring design | Pressure spring |
| Spring rate | 50 N/mm |
| Ø wire | 1.8 mm |
| Manufacturer | ASP |
| Material | Spring steel |
| Number of components | 3 pcs |
| Ø inside | 4.6 mm |
| Ø outside | 8.2 mm |
| Area of application | Tuning, Racing |
| Total length | 27 mm |
| Puch | E50 |
Accessories & related products
swiing® ingenious clutch springs reinforced (+50%) | Puch E50
Spring design: Pressure spring · Ø wire: 2 mm · Ø inside: 4.3 mm · Ø outside: 8.45 mm · Total length: 26.6 mm · Color: red · Manufacturer: swiing® ingenious parts · Number of components: 3 pcs · Material: Spring steel · Surface: coated · Area of application: Tuning
EUR 21,10
swiing® ingenious clutch springs reinforced (+60%) | Puch E50
Spring design: Pressure spring · Color: yellow · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Ø wire: 2.05 mm · Ø inside: 4.3 mm · Ø outside: 8.45 mm · Area of application: Tuning · Total length: 26.9 mm · Number of components: 3 pcs
EUR 21,10
ASP clutch 3-jaw "woven" Aramid | Puch E50
Manufacturer: ASP · Material: Steel · Material addition: Aramid (colloquially known as Kevlar) · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 6 pcs · Ø outside: 91.5 mm · Thickness: 21.5 mm · Area of application: Racing · Area of application: Tuning
EUR 282,30
Not in stock
Explore categories from Clutch
Moped fans also bought
swiing® revival gearbox cover gasket (old model) | Puch Z50 engine
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Width: 155 mm · Total length: 166 mm · Thickness: 0.35 mm · Number of fixing points: 8 pcs · Puch OEM number: 349.1.10.249.1
EUR 4,60
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Total length: 6 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Ø outside: 5 mm · Thread length: 4 mm
EUR 2,35
Airsal 45 mm cylinder kit (large ribs) | Puch
Nominal diameter: 45 mm · Manufacturer: Airsal · Material: Aluminum · Surface: sandblasted · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 50 mm · Ø outlet inside: 25 mm · Inlet window: 23.8 / 21.4 x 16 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: No · Area of application: Tuning
EUR 117,50
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
