45 mm tuning cylinder with 70 cc displacement and narrow exhaust for your Pony moped / moped with Sachs 503 AB, AC or ADV engine.
The wide-bore racing kit has been extensively reworked compared to the original cylinder. The overflow channels, intake and exhaust have been enlarged. The racing cylinder is designed for high engine speeds. Due to the longer exhaust timing, a high dynamic pressure is therefore required in order to exploit the full power.
In addition to the piston, piston ring, clips and pin, the scope of delivery also includes the required gaskets for the base, intake and exhaust. In addition, an O-ring and a reinforced graphite gasket for the cylinder cover are included, which can be used as required. It is still possible to use the original cylinder head.
Cylinder material: Cast aluminum
Piston material: Cast aluminum
Bore: 45 mm
Capacity: 69.98 cm³
Ø Cylinder neck: 52 / 50.5 mm
Exhaust port inside: 19.5 x 11 mm
Ø Exhaust port inside: 29 mm
Exhaust thread: M6 x 1
Hole spacing exhaust port: 50.5 mm
Hole spacing inlet: 36 mm
Inlet thread: M6 x 1
Ø inlet inside: 23.5 mm
Hole pattern: 56 x 56 mm
Ø stud bolt hole: 6.9 mm
Piston pin: 12 mm
Decompressor hole: yes, MF12x1.25 mm
Note: The inlet of the cylinder has a double hole pattern, so that sockets for both the AB / AC and the ADV engine can be fitted.
The narrow outlet is designed for AB / AC exhausts. A flame tube from the AB / AC engine must therefore also be fitted to the ADV engine.
This tuning cylinder is powerful and can wear out the gearbox and other engine parts more quickly. Please be aware of this when purchasing the 45 mm version.
Matching add-on parts for the cylinder set can be found in the accessories section.
Alternative to the original Pony spare part number: A2868
Branded product from the manufacturer AKOA.
| Manufacturer | AKOA |
| Material | Aluminum |
| Area of application | Tuning |
| Surface | varnished, Nickel silicon carbide (known as Nikasil®) |
| Displacement | 70 ccm |
| Nominal diameter | 45 mm |
| Crankshaft stroke | 44 mm |
| Ø piston pin (B) | 12 mm |
| Ø cylinder neck | 52 mm, 50.5 mm |
| Hole spacing inlet | 36 mm |
| Ø outlet inside | 29 mm |
| Ø Inlet inside | 23.5 mm |
| Thread inlet | M6x1 (standard thread) |
| Hole spacing outlet | 50.5 mm |
| Outlet type | slanted |
| Thread outlet | M6x1 (standard thread) |
| Decompressor | MF12x1.25 |
| Alternative version of the Pony OEM number | A2868 |
| Sachs | 503 - AB, AC, ADV |
Accessories & related products
swiing® revival gasket set | Sachs 503 AB, AC wide wall
Manufacturer: swiing® revival parts · Material: Aluminum · Material: Copper · Material: Rubber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Number of components: 21 pcs · Ø outlet inside: 24 mm · Hole spacing outlet: 38.5 mm · Hole pattern [mm]: 56 x 56
EUR 52,60
swiing® revival gasket set | Sachs 503 ADV wide wall Cat.
Manufacturer: swiing® revival parts · Material: Copper · Material: Fiber · Material: Rubber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Number of components: 15 pcs · Hole spacing inlet: 38 mm · Ø outlet inside: 23.3 mm · Hole pattern [mm]: 56 x 56 · Decompressor: No
EUR 52,60
AKOA wide wall 38 mm cylinder kit original | Sachs 503 AB, AC, ADV (A2868)
Manufacturer: AKOA · Material: Aluminum · Area of application: Standard · Surface: Nickel silicon carbide (known as Nikasil®) · Surface: varnished · Nominal diameter: 38 mm · Displacement: 50 ccm · Crankshaft stroke: 44 mm · Ø piston pin (B): 12 mm · Hole spacing inlet: 36 mm · Ø cylinder neck: 50.5 mm · Ø cylinder neck: 52 mm · Ø Outlet outside: 23 mm · Ø outlet inside: 11 mm · Ø outlet inside: 19.5 mm · Inlet window: 18x7 mm · Thread inlet: M6x1 (standard thread) · Hole spacing outlet: 50.5 mm · Outlet type: slanted · Thread outlet: M6x1 (standard thread) · Decompressor: MF12x1.25 · Pony OEM number: A2868
EUR 351,50
Not in stock
AKOA intake manifold 20 mm PHBG / CP | Sachs 503 AB, ADV (A5669, A2180)
Ø inside: 20 mm · Manufacturer: AKOA · Material: Aluminum · Hole spacing inlet: 36 mm · Mounting type: Screws · Ø External connection: 24 mm · Alternative version of the Pony OEM number: A2180 · Alternative version of the Pony OEM number: A5669
EUR 58,50
AKOA wide wall 38 mm cylinder kit Sport | Sachs 503 AB, AC, ADV (A2868)
Manufacturer: AKOA · Material: Aluminum · Area of application: Performance · Surface: Nickel silicon carbide (known as Nikasil®) · Surface: varnished · Nominal diameter: 38 mm · Displacement: 50 ccm · Crankshaft stroke: 44 mm · Ø piston pin (B): 12 mm · Hole spacing inlet: 36 mm · Ø cylinder neck: 50.5 mm · Ø cylinder neck: 52 mm · Ø Inlet inside: 23.5 mm · Ø outlet inside: 29 mm · Thread inlet: M6x1 (standard thread) · Hole spacing outlet: 50.5 mm · Outlet type: slanted · Hole pattern [mm]: 56 x 56 · Thread outlet: M6x1 (standard thread) · Decompressor: MF12x1.25 · Alternative version of the Pony OEM number: A2868
EUR 351,50
Not in stock
AKOA decompressor M12x1.25 wide wall | Sachs 503 AB, AC, ADV (A2942)
Manufacturer: AKOA · Thread type: MF12x1.25 (fine pitch thread) · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Width across flats SW: 15 mm · Total length: 66 mm · Thread length: 8 mm · Pony OEM number: A2942
EUR 93,60
Exhaust set cigar Ø 28 / 60 mm chrome | Sachs 503 AB, AC
Ø outside: 28 mm · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø Silencer: 60 mm · Mounting type: Plug connection clamped · Ø Flame tube outside: 28 mm · Exhaust type: Cigar · Flame tube attachment: Plug connection clamped
EUR 134,70
swiing® ingenious gasket outlet Ø 23 mm graphite | Sachs 503 AB, AC
Ø inside: 23 mm · Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Place of use: Outlet · Material: Steel · Color: gray · Thickness: 2 mm · Number of fixing points: 2 pcs · Hole spacing: 48.5 - 51.5 mm
EUR 10,40
GPO 15 mm intake manifold SRE | Sachs 503 AB, ADV (A5669, A2180)
Ø inside: 15 mm · Manufacturer: GPO · Thread type: M6x1 (standard thread) · Material: Aluminum · Hole spacing inlet: 36 mm · Total length: 105 mm · Mounting type: Stud bolts & nuts · Number of fixing points: 4 pcs · Height flange center hole: 55 mm · Ø External connection: 20 mm · Hole pattern [mm]: 36 x 12.5 · Total height: 63 mm · Pony OEM number: A2180 · Pony OEM number: A5669
EUR 58,50
Moped fans also bought
swiing® revival nozzle set M3.5 (64 - 74) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Material: Brass · Quantity: 6 pcs · Component group Carburetor: Spraying · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74 · Total length: 6 mm
EUR 18,60
swiing® ingenious 15 mm carburetor tuning camouflaged | Sachs 503
Width: 50 mm · Height: 95 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Component group Carburetor: Carburetor complete · Nominal diameter: 15 mm · Carburetor type: SRE · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Mounting type: Plug connection clamped · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Total length: 66 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle block: 2.17 · Camouflaged: Yes · Clamping screw torque (max.): 4 N/m
EUR 93,60
AKOA intake manifold 20 mm PHBG / CP | Sachs 503 AB, ADV (A5669, A2180)
Ø inside: 20 mm · Manufacturer: AKOA · Material: Aluminum · Hole spacing inlet: 36 mm · Mounting type: Screws · Ø External connection: 24 mm · Alternative version of the Pony OEM number: A2180 · Alternative version of the Pony OEM number: A5669
EUR 58,50
Collection only possible with online purchase and appointment.
