Special saddle tube with 22 mm outer diameter for universal use on your moped, moped and small motorcycle.
This alternative to the saddle bow allows you to change the saddle position without having to sacrifice maximum depth.
The saddle mount can be moved by 20 mm thanks to the two different holes in the support plate. This allows the seat position to be adjusted as required. Depending on the mounting direction of the saddle clamp, the seat position can also be adjusted.
The angle of the seat tube can also be adjusted between 15° and 20° with the saddle extension. This can be changed by turning the seat tube.
The adjustable seat tube can be used in conjunction with all saddle types «seat bench».
| Total length | 140 mm |
| Manufacturer | 66HEROES |
| Ø Saddle tube holder | 22 mm |
| Universal |
| Puch |
| Sachs |
| Pony / Cilo (Beta 521 & 512) |
Ratings
Accessories & related products
Loctite 638 Joining shaft-hub high-strength 10 ml
Temperature resistance (min.): -75 - 150 °C · Color: green · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Hazard warning: Causes serious eye damage · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Danger · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Chemistry · Adhesion: high-strength · Type of application: 1K · Gap dimension (max.): 0.25 mm · Alignment time: 300 sec · Breakaway torque (according to material): 23 N/m · Breakaway torque (according to material): 25 N/m · Breakaway torque (according to material): 57 N/m
EUR 25,90
EUR 2.590,00/l
Seat bench "Töfflibueb" lettering black
Manufacturer: Made in Portugal · Material: Imitation leather · Material: Steel · Ø Saddle tube holder: 22 mm · Surface: varnished · Color: black · Spring-loaded: No · Total length: 300 mm · Lettering: Yes · Width: 210 mm · Height: 95 mm · Number of fixing points: 1 pcs
EUR 65,00
Seat bench "mofakult" lettering black
Manufacturer: Made in Portugal · Ø Saddle tube holder: 22 mm · Surface: varnished · Color: black · Material: Imitation leather · Material: Steel · Spring-loaded: No · Lettering: Yes · Total length: 300 mm · Width: 210 mm · Height: 95 mm · Number of fixing points: 1 pcs
EUR 59,10
Moped fans also bought
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Mounting type: Union nut · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
EUR 11,70
swiing® revival nozzle set M3.5 (64 - 74) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Material: Brass · Quantity: 6 pcs · Component group Carburetor: Spraying · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Total length: 6 mm · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74
EUR 18,80
- 10 %
Hot 
swiing® ingenious 15 mm carburetor camouflaged | Puch
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Total length: 66 mm · Width: 50 mm · Height: 95 mm · Mounting type: Plug connection clamped · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Area of application: Tuning · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.1.15.100.0 · Puch OEM number: 349.2.15.800.0 · Puch OEM number: 349.4.15.500.0 · Puch OEM number: 349.4.15.000.0 · Puch OEM number: 349.4.15.300.0 · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0 · Puch OEM number: 349.8.15.400.0 · Puch OEM number: 349.9.15.300.0
EUR 94,70
EUR 85,20
Hot
Inner cable set automatic | Puch E50
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Total length: 1600 mm · Total length: 2200 mm
EUR 11,70
Collection only possible with online purchase and appointment.
